catalogue - Puller
MK built the first “tape puller" in 1984. They are still used today all over the world. This technology allows the fabric to be “pulled” right beside the rear sewing foot edge. This technology is now available in a range of improved variations.
MK – mini pullers with step motor technology
Step motor pullers on a Juki Sewing machine
MK produces adjustable step motor pullers for high-speed sewing machines.
This puller has the following advantages:
MK – maxi puller
A maxi puller is a powerful and stable puller drive. All pullers can be tilted up, the puller feed lifts up automatically with the sewing foot. MK produces these pullers for all sewing machines, including heavy and long arm sewing machines.
We can supply pullers with various finishes – depending on the material – including steel.
MK produces the following designs:
Both models are available in different variations:
Maxi puller with small steel rollers and cutting in front of the needle, pullers with compensating sewing feet on a zigzag sewing machine.
Maxi pullers with large rollers and non-driven small counter-roller
Maxi puller on a long arm machine
Maxipuller long arm Duerkopp-Adler 867
MK Maxipuller with driven puller rolls above and below.
roller diameter: 54 mm
roller width: 50 mm
stitch length max: 12 mm
Maxi pullers with large roller and large driven counter-roller
Maxi double puller with two parallel puller rollers
Double pullers are used for waistbands, as well as for button and buttonhole facings on blouses and dresses.
This type of production always requires large needle distances and different fabric thicknesses between the left-hand and right-hand needles.
MK produces special compensation sewing feet for these conditions,special compensating feet from double needles to 6-part needles.
Puller for feed-off-the-arm sewing machines
Workstation feed-off-the-arm air bag sewing with puller
Puller for heated wedge-shaped tool-welding machine and ultrasound welding machines
Multiphase puller for an ultra-sonic welding machine
Puller with two synchronously driven feed rollers for a heated-wedge-shaped tool welding machine
07.04.2009 MK exhibits the very first time on "TECHTEXTIL" in Frankfurt from 16.-18.06.2009.You will find us in Hall 3.0 on Stand H37 !
© MK Sewing